RJ45 Mic Switch


 
 

Order online at our Secure Web Store!



  • Easily switch between digital and voice operation
    using radios that only have an RJ45 Mic jack

  • Works with the SignaLink, TNCs and other communication devices

  • Simple Installation and Operation

  • No power required

  • Switches all 8 lines of the RJ45 Mic jack plus stereo audio

 

The Microphone Switch Model SW-RJ45 provides a simple yet effective way to connect both a microphone and a communication device (SignaLink, TNC, etc.) to a radio's 8-pin Modular RJ45 Mic jack, and select between them without needing to disconnect / reconnect the microphone or cabling.  This is perfect for installations where you need to operate both digital and voice but your radio provides only a mic jack connection (EMCOMM, VARA, Packet, SSTV, etc.). The installation and operation of the switch is very simple.  All required cabling is supplied** and it is ready to use out of the box.  The smaller, matching case also looks great next to your SignaLink USB!

 


Features:

**NOTE: To connect the SW-RJ45 to your SignaLink you will need radio cable p/n SLCABRJ4, which is supplied with SignaLink USB p/n SLUSBRJ4. If you do not already have this cable then you will need to purchase it separately. To connect this switch to a TNC or other communication device, you will need the cable that you normally use to connect that device to the radio's mic jack. If you do not have this cable then you will need to acquire it from the manufacturer of your device.


SW-RJ11 Rear View SW-RJ11 Board 
Rear View  Inside View 


What's Included:

 


Specifications:

Radio Connection: 8-pin modular RJ45 Female (all eight lines are switched)
3.5mm stereo (TRS) Female.  Compatible with both mono and stereo cables.
Microphone/Headphone/Ext. Speaker Connection: 8-pin modular RJ45 Female (all eight lines are switched)
3.5mm stereo (TRS) Female.  Compatible with both mono and stereo cables.
Aux Device Connection: 8-pin modular RJ45 Female (all eight lines are switched)
3.5mm stereo (TRS) Female.  Compatible with both mono and stereo cables.
Case: Custom extruded aluminum, powder coated
Dimensions: 1.1" x 2.7" x 3.2"
Specifications are subject to change without notice.  Tigertronics reserves the right to change specifications to improve our products, or for any other reasons that we deem necessary.

Additional Information:


Tigertronics - All Rights Reserved  |  BayPac, SignaLink, and TigerTrak are trademarks of Tigertronics
All other trademarks are the property of their respective owners