SLMOD6PM  - This jumper module is compatible with virtually all ICOM, Kenwood, and Yaesu radios that have a 6-pin mini-DIN Data Port.  This includes but is not limited to the radios listed below.  Be sure to see our radio wiring and jumper settings page for any special notes on your radio (menu settings, etc.).

NOTE:  This jumper module is also compatible with all hand-held radios (HTs) that use our SLCABHTW radio cable.  This includes virtually all Baofeng and Wouxun HTs, as well as most Kenwood HTs.

ICOM
IC-207H, IC-208H
IC-2720H
IC-2800, IC-2820
IC-703
IC-706MKIIG
IC-746PRO
IC-7000
IC-7100
IC-7400
IC-910H
ID-880
IC-9100

KENWOOD
TM-251/255
TM-271**, TM-271A**
TM-451/455
TM-D700, TM-D700A
TM-D710, TM-D710A, TM-D710E
TM-G707
TM-V708
TM-733A
TM-V7, TM-V7A, TM-V71A
TS-480HX, TS-480SAT

**European TM-271/271A models only

YAESU
FT-100, FT-100D
FT-817, FT-817ND
FT-450
FT-840**
FT-847**
FT-857
FT-891
FT-897
FT-950
FT-991
FT-DX1200
FT-DX3000
FT-1500M
FT-7100
FT-7800R
FT-7900R
FT-8100
FT-8500
FT-8800R, FT-8900R
FTM-100DR##
FTM-350**
FTM-400DR##
VX-1700

**Data Port supports VHF & UHF Packet only.

**The FTM-350 requires Yaesu's CT-141 adapter to convert from it's 8-pin mini-DIN connector to a standard 6-pin mini-DIN.  This adapter should be available from any authorized Yaesu dealer.

##The FTM-100DR and FTM-400DR requires Yaesu's CT-164 adapter to convert from a 10-pin mini-DIN connector to a standard 6-pin mini-DIN.  This adapter should be available from any authorized Yaesu dealer.